Decoration board high density decoration board var

  • Detail

There are many kinds of plates, and their functions are different without the use of plate specifications. From medium density fiberboard to decorative panel, each function and function is different. Among the types of decorative panels sold in the market, wood-based panels are basically used for furniture. Few use solid wood and the cost is very expensive. The quality of the panels can directly determine the results of decoration. Today, Xiaobian will tell you about the relevant knowledge of decoration boards to see how high-density decoration boards are

plate classification

decorative materials are divided into two parts: one is outdoor materials, and the other is indoor materials

indoor materials are further divided into five types: solid materials, plates, sheets, profiles and wires

decorative board is the general name of all boards, mainly including:

I. Blockboard

Blockboard (commonly known as big core board and wood board) is plywood with solid wood core. Its vertical (distinguished by the direction of core board) bending strength is poor, but its horizontal bending strength is relatively high. At present, most of the BLOCKBOARDS on the market are solid, glued, double-sided sanding, five layer BLOCKBOARDS, with size specifications of 1220 mm× 2440mm。

II. Plywood

plywood is made of three or more layers of solid wood veneers or thin sheets of about one millimeter by adhesive hot pressing. The common ones are three plywood, five plywood, nine plywood and twelve plywood (commonly known as plywood, five plywood, nine plywood, twelve plywood)

III. decorative panel

decorative veneer veneer plywood (decorative panel, veneer), is a decorative panel with single-sided decorative effect, which is made by accurately planing solid wood into thin veneers with a thickness of more than 0.2 mm, using plywood as the base material and through the adhesive process

IV. density board

density board is divided into medium density fiberboard (medium density board) and hard fiberboard (high density board), with a density of 450-mdash; Medium density fiberboard is 800 kg/m3, and hard fiberboard is more than 800 kg/m3. Density board is made of plant wood fiber through hot grinding, paving, hot pressing and other processes

v. Glulam

Glulam is a new kind of solid wood material, which uses large-diameter logs and is deeply processed and looks like a wooden board that is staggered and spliced like fingers

VI. particleboard

particleboard is formed by crushing natural wood into particles and then bonding and pressing. Because its profile is similar to honeycomb, it is called particleboard

VII. Fireproof board

fireproof board is a decorative board made of silicon material or calcium material as the main raw material, mixed with a certain proportion of fiber materials, lightweight aggregates, adhesives and chemical additives, and autoclaved. Its thickness is generally 0.6— 1.2mm。

VIII. Gypsum board

is made of anhydrite as the main raw material mixed with additives and fibers. The combination of gypsum board and light steel keel (pressed from galvanized thin steel) forms light steel keel gypsum board. There are many kinds of light steel keel gypsum board ceilings, including paper gypsum board, decorative gypsum board, fiber gypsum board, hollow gypsum board, and various specifications

IX. PVC plate

pvc plate is a plate with honeycomb mesh structure in cross section made of PVC. Most of them are plain colors, but there are also imitation patterns and imitation marbles

X. aluminum gusset plate

aluminum gusset plate is an aluminum product. The installation method is called aluminum gusset plate because it is buckled on the keel. The thickness of aluminum gusset plate is generally 0.4mm— 0.8mm, including strip, square, diamond, etc

Xi. Aluminum plastic plate

aluminum plastic plate is composed of thin aluminum layer and plastic layer, which is divided into single-sided aluminum plastic plate and double-sided aluminum plastic plate, and the thickness is generally 3— About 5mm

decorative wood high density board

a, characteristics

density board has smooth and flat surface, fine material, stable performance, firm edges, and good decorative property of the board surface. However, the moisture resistance of the density board is poor, and in contrast, the nail holding force of the density board is worse than that of the particleboard. If the screws loosen after tightening, it is difficult to fix the density board again because of its low strength

b, purpose

it is mainly used for laminate flooring, door panels, partitions, furniture, etc. Density board is mainly used for surface treatment of oil mixing process in home decoration

c, choose

density board to mainly detect the formaldehyde emission and structural strength. Density board is divided into E1 and E2 levels according to the formaldehyde emission, and the formaldehyde emission of more than 30mg/100g is unqualified. Generally speaking, most of the density boards of the scales of the large-scale manufacturers are qualified. Most of the density boards on the market are E2 grade, and few are E1 grade

the above is the introduction of the high-density decoration board. I hope it will be helpful to you. For more information about planks, please continue to pay attention to information





Copyright © 2011 JIN SHI